Classification of lamps(二)

According to the shape and installation method of lamps, there are ceiling lamps, chandeliers, floor lamps, table lamps, spotlights, downlights, etc.

Today I will introduce  chandeliers.

The lamps suspended below the ceiling are divided into single-head chandeliers and multi-head chandeliers. The former is mostly used in bedrooms and dining rooms, while the latter is mostly used in living rooms. Multi-head chandeliers with complex shapes should be used in spaces with high floor heights, and the distance between the lowest point of the lamp and the floor should be more than 2.1 meters; in a duplex or jump-storey, the lowest point of the hall chandelier should not be lower than the second floor. The chandelier with the lampshade facing up is not recommended. Although the light source is hidden and not dazzling, there are too many disadvantages: it is easy to get dirty, the lamp holder will block the light, and there are often shadows directly below. The light can only be transmitted by the lampshade and reflected from the ceiling. Also it is low efficiency.

When choosing a multi-head chandelier, the number of lamp heads is generally determined according to the living room area, so that the proportion of the size of the lamp and the size of the living room is harmonious. But as the number of lamp caps increases, the price of the lamp doubles.

Therefore, ceiling fan lights are especially recommended: the shape of the fan blades is scattered, making the overall size of the lamp larger, and the fan blades with a diameter of 1.2 meters can be used in a large space of about 20 square meters; the wind speed is adjustable, and when the summer is not too hot, turning on the fan saves electricity , and more comfortable than the air conditioner; the fan can be set to reverse, such as turning on when eating hot pot, which can speed up the air flow, and people will not feel windy. It should be noted that the ceiling fan light needs to reserve two wires, which are connected to the fan and the light respectively; if only one wire is reserved, it can be controlled by a remote control circuit.


Post time: Jul-13-2022